spraying the guts of my amp... spraying the guts of my amp... - diyAudio
Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum

spraying the guts of my amp...
spraying the guts of my amp...
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 19th April 2005, 03:01 PM   #1
9am53 is offline 9am53  Canada
diyAudio Member
Join Date: Feb 2005
Location: Ontario
Send a message via MSN to 9am53
Default spraying the guts of my amp...

Hello all, this will likely be a dumb question, but here goes...from what I understand when building point to point amplifiers the quality of your soldering and connections directly effects how noisy your amp is...ie. if there is lots of exposed wire you may hear unwanted hum. What I have been thinking about is if I get my current amp to where I want it to be, and wont be doing any mods on it anymore, can I spray the underside with some sort of insulating material to shield all exposed leads? a spray paint or something...?
Guitar is Good
  Reply With Quote
Old 19th April 2005, 03:12 PM   #2
tiroth is offline tiroth  United States
diyAudio Member
Join Date: Dec 2001
Location: Pittsburgh, PA, USA
Air is actually a better dielectric than anything you could coat it with. You won't get any shielding no matter what you coat it with--generally, it isn't necessary to do so inside a shielded chassis anyway.

You might be afraid of corrosion of exposed copper though, in which case it might make some sense to protect them. There are commercial spray urethane coatings available that are designed for this -- any large distributor will carry them. The advantage is that the urethane is reworkable if you need to make changes or repairs.
  Reply With Quote
Old 20th April 2005, 01:25 AM   #3
anatech is offline anatech  Canada
diyAudio Moderator
anatech's Avatar
Join Date: Jun 2004
Location: Georgetown, On
spraying the guts of my amp...
Hi 9am53,
It's not the exposed wire at all. The isulation only protects from shorts. The problem is where the wire is run (ie. lead dress). Component placement is also important.

So don't spray anything in your amp. Keep heater wires near the metal chassis and away from low level stuff. Cross leads and wire at 90 for minimum coupling. AC leads ought to run along one side away from everything near the power transformer.

Lot's of other stuff you can do but those are the basics.

  Reply With Quote


spraying the guts of my amp...Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
amp guts d0n Solid State 14 11th May 2009 10:20 PM
Spraying conductive coating 405man Planars & Exotics 4 6th April 2008 11:39 AM
Re-post: Spraying advice needed *Sorry* tf1216 Multi-Way 18 28th April 2006 03:41 PM
Spraying advice needed tf1216 Everything Else 2 25th April 2006 05:15 PM
Amp Guts Page is Up!! Matt74 Car Audio 5 2nd November 2005 02:56 PM

New To Site? Need Help?

All times are GMT. The time now is 04:49 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio