Bias the new power tube
I am a new one, I would like some one help me to calcultate to make BIAS a new power tube.
The answer to that could fill a book. Or at least a chapter or two of a book. A few days spend studying the Radiotron Designer's Handbook will help a lot- this is a complex issue with a lot of variables.
Or... you can just go with the recommendations of the tube manufacturer. Most data sheets for power tubes give suggestions for load, bias, power, and distortion.
If you don't have the tube's data, you'll probably find it here:
|All times are GMT. The time now is 10:24 AM.|
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2015 DragonByte Technologies Ltd.
Copyright ©1999-2015 diyAudio