I have a schem i used for this tube, i found it on the net but i cannot remember if it was for 6AK5 or 6AU6.
I have typed wrong in the schem, supposed to be 6AK5W and not 6AK7W. This circuit worked very well for me with both the 6AU6 and 6AK5, but as i said i cannot remember for which tube it was for.
An externally hosted image should be here but it was not working when we last tested it.
I have typed wrong in the schem, supposed to be 6AK5W and not 6AK7W. This circuit worked very well for me with both the 6AU6 and 6AK5, but as i said i cannot remember for which tube it was for.
Heres a schematic for 6AK5 i found today:
I hope this helps
An externally hosted image should be here but it was not working when we last tested it.
I hope this helps
You should be able to get ample gain out of it. One 6CL6 stage I tested (which drew 20-30mA, plenty drive for anything) had a gain of 80. 6AU6 is listed for up to 400 or so gain, not much current though. 6AK5 can probably do 50-200 gain at 1-10mA, depending on what it looks like... I can do some graphing if you'd like.
Tim
Tim
Have a look at the Mazda Belvu datasheet.
http://www.mif.pg.gda.pl/homepages/frank/sheets/020/6/6AK5.pdf
Yes, it's in French, but the important parts are universally understood anyway. Pages two and three show lots of operating points and gives the gain and tension de sortie pour 5% de distortion harmonique totale for each... (output voltage at 5% THD)
http://www.mif.pg.gda.pl/homepages/frank/sheets/020/6/6AK5.pdf
Yes, it's in French, but the important parts are universally understood anyway. Pages two and three show lots of operating points and gives the gain and tension de sortie pour 5% de distortion harmonique totale for each... (output voltage at 5% THD)
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.