• WARNING: Tube/Valve amplifiers use potentially LETHAL HIGH VOLTAGES.
    Building, troubleshooting and testing of these amplifiers should only be
    performed by someone who is thoroughly familiar with
    the safety precautions around high voltages.

Tube audio transformer

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Hi!

I need some help on this.

I want to make my own O/P transformer to tube amp.
I've searched a lot here at the forum, at google, and some other 'portals'.
I still not have the infos I want.

So:
- Formulas;
- Windings (how to);
- Cooper diameter;
- Etc.

I know that the best is to wind p-s-p-s-p... portions in layers.

Thanks in advance for any answer.
 
I have posted this before, but here goes again:

This document prepared by Craig Ryder is an excellent resource for links to almost anything to do with valves!

There are many good transformer references in there - I've copied them below:

 
Hi all,

ok, if anybody wants this document please PM me and I' ll send it per e-mail. It' s a rather large doc, and can' t post it here on the forum, due to size limitations of the attachments.
The link I provided links to my Yahoo briefcase, where I posted it temporarily.

Cheers,

Bruno
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.