Hello, I hope the frequency of my posts/questions isnt upsetting anyone...heres my post/question of the day!
The phase splitting and pp output duties on my amp are performed by a pair of 6gw8/ecl86 High-Mu Triode -- Sharp-Cutoff Pentode tubes. I am assuming that the phase splitting is done by either 2 triodes or 2 pentodes, and the other two do the outputting. Knowing the "High-Mu Triode -- Sharp-Cutoff Pentode " description of the tubes, does this say anything about whether its the triodes or pentodes doing the outputting? I am just trying to understand the schematic before I do any surgury...thanks for your patience
The phase splitting and pp output duties on my amp are performed by a pair of 6gw8/ecl86 High-Mu Triode -- Sharp-Cutoff Pentode tubes. I am assuming that the phase splitting is done by either 2 triodes or 2 pentodes, and the other two do the outputting. Knowing the "High-Mu Triode -- Sharp-Cutoff Pentode " description of the tubes, does this say anything about whether its the triodes or pentodes doing the outputting? I am just trying to understand the schematic before I do any surgury...thanks for your patience
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.