diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Tubes / Valves (http://www.diyaudio.com/forums/tubes-valves/)
-   -   Ampex 600 pre (http://www.diyaudio.com/forums/tubes-valves/53646-ampex-600-pre.html)

Rasputana 16th March 2005 08:49 PM

Ampex 600 pre
 
Hi there. I recently got an Ampex 600. I am interested to use the preamp in my home studio to record acoustic instruments into my Tascam 2488 multitracker. I think it may need some work to restore it to its full glory, as the audio signal seems to clip and distort at what seems to be quite low volume (with the volume at about 2 or 3). :hot: An additional detail is that the vu meter needle doesn't seem to go below -5/-7 dB when the mic is on and the vu meter needle shoots out with any kind of light room noise :whazzat: . I am trying to use it unmodified, using the headphones output straight into my multitracker, which I realise might need changing to match impedances, etc.:smash:

Has anyone got any idea what should be done to optimise this potentially very interesting pre to make it fully compatible with my digital multitracker? Thanks in advance,

Rasputana


All times are GMT. The time now is 01:23 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2