Go Back   Home > Forums > Amplifiers > Tubes / Valves

Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 11th March 2005, 09:12 PM   #1
jjai is offline jjai  United States
diyAudio Member
 
Join Date: Mar 2005
Location: San Francisco, CA
Default Screen voltage - standby cut (Roland Bolt 60)

I just purchased a Roland Bolt 60 - a 60W guitar amp circa 1980 that has a SS preamp and tube power amp (2 6L6s and 1 12AT7 phase inverter).

I've been doing some research and discovered that there is apparently a design flaw -- the standby switch only cuts plate voltages, supposedly causing the screen current to exceed the "limits allowed by tube manufacturers."

I'm a bit of a tube newbie, and I'm wondering - is this something worth fixing? Will this problem damage the amp/make me run through tubes like crazy?

I don't have a schematic, and I'm sort of a newbie, so I'm a little wary of tearing into my the amp and tinkering (especially after unsucessfully trying to fix another amp for 2 months before giving up).

Any suggestions/advice/copies of the schematic for this amp would be much appreciated!

-Jerry
  Reply With Quote
Old 12th March 2005, 12:12 PM   #2
Giaime is offline Giaime  Italy
diyAudio Member
 
Giaime's Avatar
 
Join Date: Oct 2004
Send a message via MSN to Giaime
First of all for all tube newbies: if you aren't qualified to work on extreme dangerous high voltage tube equipment, just don't do it: refer to a qualified technician.

For the amp problem: it is possible that the amp (like many) was designed with the strong tubes of the past ages. Many new production tubes aren't strong enought to survive to those things... for example an RCA could do it but not a cheap Sovtek...
I think that to solve the problem you could:
- add some screens resistors to limit current on the screens, 1k 5w for each tube will do;
- move the standby switch to the center-tap of the B+ winding on the power transformer. If the original switch was a SPDT it is the best solution, if it is a DPDT you can switch both the B+ wires from the PT.

Remember that this is dangerous work...
  Reply With Quote
Old 23rd May 2005, 06:26 AM   #3
diyAudio Member
 
Join Date: May 2005
Location: lisboa
Default solving Bolt 60 standby switch design mistake

Hello,
before doing anything with your bolt go to:

http://bolt60.no.sapo.pt


there you have the info about the standby switch modification, and you have also the schematics , manual and service notes for the bolt 60, don't waste your time with the message above, go only on this site.
  Reply With Quote
Old 23rd May 2005, 11:33 AM   #4
Giaime is offline Giaime  Italy
diyAudio Member
 
Giaime's Avatar
 
Join Date: Oct 2004
Send a message via MSN to Giaime
Default Re: solving Bolt 60 standby switch design mistake

Quote:
Originally posted by rolandbolt
don't waste your time with the message above
Thank you very much!
  Reply With Quote
Old 23rd May 2005, 11:50 AM   #5
SHiFTY is offline SHiFTY  New Zealand
diyAudio Member
 
SHiFTY's Avatar
 
Join Date: Jul 2002
Location: New Zealand
Don't use the standby switch
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Pentode cathode follower with regulated screen voltage? G Tubes / Valves 14 18th November 2013 11:01 PM
Why does lowering screen voltage reduce headroom? flysig Tubes / Valves 2 27th May 2009 05:20 AM
6V6 SE and Screen Grid Voltage zxx123 Tubes / Valves 5 2nd February 2005 05:36 PM
Modifying (Reducing) Screen Voltage gingertube Tubes / Valves 1 14th December 2004 06:10 AM
Setting Pentode Screen Grid Voltage dshortt9 Tubes / Valves 1 19th January 2003 11:22 PM


New To Site? Need Help?

All times are GMT. The time now is 11:59 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2