diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Tubes / Valves (http://www.diyaudio.com/forums/tubes-valves/)
-   -   Valve Art KT100 (http://www.diyaudio.com/forums/tubes-valves/52988-valve-art-kt100.html)

Peter M. 7th March 2005 06:36 PM

Valve Art KT100
 
Does anybody have some data or a datasheet on the Valve Art kT100?

It seems to be impossible to find...

Best regards,
Peter

richwalters 9th March 2005 10:43 PM

It's an attempt market con.......really an upped 88 in thicker glass.....omo....a total waste of time whoever conceived using the standard octal base. I'm also after Tung-sol 6550 info......but again nothing appears.....so I only purchase from vendors who are willing to give specs..

richj

Peter M. 10th March 2005 02:20 PM

Thanks richj.

Market con?
I have heard it is closer to the kt90, with a special plated copper anode, higher transconductance and lower plate impedance than the kt88. But that may be wrong...

Maybe i`ll try the kt90 from EI or EH...

Thanks again,
Peter

richwalters 10th March 2005 08:13 PM

EI KT90's....unfortunately rank not- on my opinion scale.....poorly made......with poor spot welds and internal shorts....maybe I got a poor batch..... rather embarassing when on live band shows. ....

Last year the KT90 has been discussed on this forum......I found with the standard UL 43% p-p circuits it produces roughly double the thd compared to a good KT88.

I haven't tried EH tubes there are so many different names made by one manufacturer....others on the forum have tried the KT90.....I believe with favorable results.

richj


All times are GMT. The time now is 12:26 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2