Stepped Attenuator and Selector Switch

Bryan · 18th February 2005, 05:07 PM

Hey Guys,

After much delay in finishing my 12B4A linestage, things are finally coming together.

I need some advice on an attenuator. Gold point/DACT etc. Type preference? Also, I need a good selector switch. This is going into a pretty high end pre (follow 12B4A linestage thread for details), and I don't want to cut corners.

So, any suggestions are appreciated.

Thanks,

Bryan

audiopro · 18th February 2005, 05:38 PM

Can't help you with the attentuator, but I just did a retrofitfit on some Sugden gear for a customer, and used an Electroswitch selector switch. It seems quite well made. P/N C4D0206N-A
Available from Newark.

markgall · 18th February 2005, 06:14 PM

I have a pair of the goldpoint mini-h shunt type mono's in my diytube st-35 amp and am quite pleased with them.
Mark

18th February 2005, 05:07 PM	#1
Bryan diyAudio Member Join Date: Jun 2003 Location: Reading MA	Stepped Attenuator and Selector Switch Hey Guys, After much delay in finishing my 12B4A linestage, things are finally coming together. I need some advice on an attenuator. Gold point/DACT etc. Type preference? Also, I need a good selector switch. This is going into a pretty high end pre (follow 12B4A linestage thread for details), and I don't want to cut corners. So, any suggestions are appreciated. Thanks, Bryan __________________ Dont take life too seriously, you will never get out alive!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Switch for stepped attenuator	jnb	Parts	0	4th October 2007 02:02 PM
Remote stepped LADDER NETWORK attenuator w/ source selector	cartman	Swap Meet	9	28th May 2006 07:37 AM
Alps switch for stepped attenuator	rebojorge	Parts	3	12th January 2006 10:58 PM
stepped attenuator	ivegotmono	Tubes / Valves	4	7th January 2006 02:49 PM
DCT Stepped Attenuator Switch 30 Step	mozfet	Swap Meet	29	1st March 2004 05:02 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

18th February 2005, 05:38 PM	#2
audiopro diyAudio Member Join Date: Feb 2004 Location: Hamilton, ON	Can't help you with the attentuator, but I just did a retrofitfit on some Sugden gear for a customer, and used an Electroswitch selector switch. It seems quite well made. P/N C4D0206N-A Available from Newark.

18th February 2005, 06:14 PM	#3
markgall diyAudio Member Join Date: Jul 2004 Location: Illinois	I have a pair of the goldpoint mini-h shunt type mono's in my diytube st-35 amp and am quite pleased with them. Mark