• WARNING: Tube/Valve amplifiers use potentially LETHAL HIGH VOLTAGES.
    Building, troubleshooting and testing of these amplifiers should only be
    performed by someone who is thoroughly familiar with
    the safety precautions around high voltages.

Any designs for 6EJ7 out there?

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
I keep seeing the 6EJ7 on sale at PE, and I have searched and found it used as the front-end in designs such as the Moonlight amp and some commercial designs, so it must be decent for audio. But I can't find any schematics for line stages or full amps that make heavy use of it and therefore would be a bargain to build at that price. Any leads?
 
Hi there...the slope of the EF184 is about as linear as one could have it....low distortion.....run them at 10mA. examine the slope at Franks electron tube data. The Radford STA100 amp uses them as CC phasesplitter. However like everything else, improvments can be made to the original.

rich
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.