Which phono preamp ?

[yagoolar]

Hi,

I was looking for an easy, simple and fast to build schematics of a phono RIAA preamp. The most suitable would be one to be built with 2 triodes / channel e.g. one ECC83 per channel.

Could you share experience?

[Ralph]

http://www.triodedick.com/phonodude_deel_1.htm

or http://www.dddac.de/tp06.htm

[mcs]

For one ECC83 per channel, how about the one from the RCA tube manual?

But I like this one better: http://stiftsbogtrykkeriet.dk/~mcs/Phono/

Best regards,

Mikkel C. Simonsen

[ThorstenL]

Konnichiwa,

Originally posted by yagoolar
I was looking for an easy, simple and fast to build schematics of a phono RIAA preamp. The most suitable would be one to be built with 2 triodes / channel e.g. one ECC83 per channel.

<Yoda Mode on>

Of interest may you find the Phonostage I discuss here:

DC Phonostage thread discussing a simple 2-Stage Phono

The original circuit was "tuned" for use with EHX 12AX7 and current production russian 6N23PR/6922. Don't use the 6N1P please. Powersupply is extensively discussed too.

Sayonara

[yagoolar]

Kuei Yang Wang san,

Arigato gozaimashita.

I will certainly learn from that thread.

Yagoo

[yagoolar]

Hi,

Finally I have assembled and done first listening test with the phono preamp. So far so good. I have attached pictures (Photo Gallery) of the pre and power supply if someone interested.

http://www.diyaudio.com/forums/showt...776#post560776

Thanks for everyone who helped me, special ones for Kuey for the schematic I started with.

Yag