psu design problem - diyAudio
Go Back   Home > Forums > Amplifiers > Tubes / Valves

Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 1st November 2004, 11:49 PM   #1
diyAudio Member
 
Join Date: Dec 2003
Location: brussels
Default psu design problem

hello everybody,

i wanna build an amp : an push pull el84; that is also driven by an el84

the problem is that i have already material lying around.

i have a power supply that if you put 220 on it (i live in europe) you get 140 volt out of it. (0.2amp)

the orginal design was an push pull el84 driven by 3 ecc83, and also 2*ecc83 for the phono stage.

i will have to put an extra trannie for the heaters.

but now the real problem, i 'm gonna go solid state psu, because it's a first project, and also wanna keep the cost low. In the original there is a voltage doubler (the one you get with the psu designer, hahaha, it uses 100uf) , so it puts out 280 volt, that's allright, (i has to be 300 but i don't think i can get that, or am i wrong, still with 280 i gotta work also).

but what after that voltage doubler ? a snubber circuit, and an CRC or CLC circuit and how to implement ?

i find psu schemes the hardest of an amplifier, that's why i call the help of some guys. i have already simulated with the psu designer, but don't feel to sure about it. so any help is welcome

thanx guys
  Reply With Quote
Old 2nd November 2004, 08:19 PM   #2
Account Disabled
 
Join Date: Sep 2004
Location: Earth
Why don't you feel so sure with PSUD2.It's a cool program and works.
  Reply With Quote
Old 2nd November 2004, 08:24 PM   #3
diyAudio Member
 
yagoolar's Avatar
 
Join Date: Oct 2004
Location: Mazowieckie, Jozefoslaw
Send a message via ICQ to yagoolar Send a message via Skype™ to yagoolar
Hi,

You should not be skeptical. I always use it and it *is* accurate.

Regards
  Reply With Quote
Old 2nd November 2004, 08:51 PM   #4
diyAudio Member
 
yagoolar's Avatar
 
Join Date: Oct 2004
Location: Mazowieckie, Jozefoslaw
Send a message via ICQ to yagoolar Send a message via Skype™ to yagoolar
Hi then_dude,

If I were you, I would go something like that (see attached file). This sim was quick and I don't know much about your PP setup, voltages and so on. I assumed 0.1 A per channel / one psu. However with 1 xformer per channel this does not give you much room for output power and might be insufficient.

(PSUD2, accuracy=high, f=50Hz, Ui=240V, offload Vo=140V)
Attached Images
File Type: jpg then_dude_psu.jpg (96.0 KB, 198 views)
  Reply With Quote
Old 3rd November 2004, 02:23 AM   #5
diyAudio Member
 
jackinnj's Avatar
 
Join Date: Apr 2002
Location: Llanddewi Brefi, NJ
Play around with the transformer -- if you have the nerve you can use a spare filament transformer to place 12.6VAC onthe 6.3VAC winding -- this will double the voltage on the HV secondary (of course, you disconnect the original primary connections );!

a doubler works fine for tube devices -- very suitable for regulation, the displayed image is a regulator with an LM317 regulator which has its adjust pin lifted by a zener string (courtesy of National Semiconductor) Click the image to open in full size.
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Crossover Design Problem lscangus Multi-Way 1 25th November 2005 05:07 AM
PCB Design problem.. Pls advice xitronics Everything Else 5 29th October 2005 05:19 PM
Ongoing bass cab design problem TheoM Subwoofers 15 8th September 2004 04:24 AM
CFP output design problem Duo Solid State 7 19th January 2004 10:38 PM
subwoofer design problem pkgum Subwoofers 90 30th December 2001 12:12 AM


New To Site? Need Help?

All times are GMT. The time now is 11:23 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2