Banned
Joined 2002
kevinkr said:Use PSUD to design your own power supply
Unfortunately PSPUD is still Windoz only... won't run well on Jason'r creaky old Beige G3 -- i guess he could run it on his girlfriend's now unused Compaq....
dave
Banned
Joined 2002
Hi,
As shown in the schematic the supply voltage is 400V (see that battery symbol? LOL) .. I will put something up in the next couple of days..
I am no fan of windows, although I have kept XP Pro well patched and use thunderbird and Firefox. Never had a virus or a worm.. I will switch fully to linux when longhorn comes out and support for XP ends!!
As much as I like the MAC ( i really do) almost all good engineering software runs under windows..
There are versions of spice that run on linux, but they are ummmm, unfriendly...
Kevin
As shown in the schematic the supply voltage is 400V (see that battery symbol? LOL) .. I will put something up in the next couple of days..
I am no fan of windows, although I have kept XP Pro well patched and use thunderbird and Firefox. Never had a virus or a worm.. I will switch fully to linux when longhorn comes out and support for XP ends!!
As much as I like the MAC ( i really do) almost all good engineering software runs under windows..
Kevin
Banned
Joined 2002
Banned
Joined 2002
Different view altogether
Just to intrude on the thread... with something completely different. Do not mind the fact that only one half of the 6AS7 is used for each channel! You can always add another in parallel...
Any comments -- does it seem more interesting now? Just reply!
PS -- the pdf file I tried to upload is too large?! That is why I have uploaded two "prints" of the original file. I hope they show all important details well enough.
Just to intrude on the thread... with something completely different. Do not mind the fact that only one half of the 6AS7 is used for each channel! You can always add another in parallel...
Any comments -- does it seem more interesting now? Just reply!
PS -- the pdf file I tried to upload is too large?! That is why I have uploaded two "prints" of the original file. I hope they show all important details well enough.
Attachments
these guys have just announced a system -- big bucks -- that uses a tube complement that could well mean it is a development on the svetlana 6BM8/6AS7 scheme....
It's cute...
dave
An externally hosted image should be here but it was not working when we last tested it.
It's cute...
dave
Banned
Joined 2002
JasonL said:I think i have the simular schematic for that too..!!!
You should, it was a print-out you had of the Svetlana circuit that reminded me....
dave
Banned
Joined 2002
6080/6AS7
If no one has noticed, there is a similar thread going on in the forums: I've just posted another schematic, slightly different than the one I have posted on this thread a few hours ago.
No high voltages involved... it's the first 6AS7 amp I made (at the time with 6080 tubes, since I did not have any of the coke bottle 6AS7s).
If no one has noticed, there is a similar thread going on in the forums: I've just posted another schematic, slightly different than the one I have posted on this thread a few hours ago.
No high voltages involved... it's the first 6AS7 amp I made (at the time with 6080 tubes, since I did not have any of the coke bottle 6AS7s).
Attachments
Banned
Joined 2002
Re: 6080/6AS7
You see i'm looking for a am with COKE bottles : O ) i want big ones.
Dave ( planet10 ) gave me a 813 tube and i love it..
and i'm following both thread's
Alex Kitic said:If no one has noticed, there is a similar thread going on in the forums: I've just posted another schematic, slightly different than the one I have posted on this thread a few hours ago.
No high voltages involved... it's the first 6AS7 amp I made (at the time with 6080 tubes, since I did not have any of the coke bottle 6AS7s).
You see i'm looking for a am with COKE bottles : O ) i want big ones.
Dave ( planet10 ) gave me a 813 tube and i love it..
and i'm following both thread's
ST shape
Some time ago, I was on the lookout for ST shape (coke bottle) tubes...
I never actually tired of the shape, and I still prefer it! But, after a while, the only shape that can excite me nowadays is GLOBE.
A friend of mine once said: "Yes, I do not like these metal envelope tubes, either... but once we consume all these glass envelope tubes, we will be happy to turn to the metal ones!".
Regards to all,
Aleksandar
PS
If you want to go ahead with an 6AS7 amp, just do it! 813 is a different affair... and it's not a triode (am I mistaking -- is it the large non ST shape pentode?). I would like to do something with 811s (large ST) but I do not wish to embark in interstage transformers and A2 with current drive...
Some time ago, I was on the lookout for ST shape (coke bottle) tubes...
I never actually tired of the shape, and I still prefer it! But, after a while, the only shape that can excite me nowadays is GLOBE.
A friend of mine once said: "Yes, I do not like these metal envelope tubes, either... but once we consume all these glass envelope tubes, we will be happy to turn to the metal ones!".
Regards to all,
Aleksandar
PS
If you want to go ahead with an 6AS7 amp, just do it! 813 is a different affair... and it's not a triode (am I mistaking -- is it the large non ST shape pentode?). I would like to do something with 811s (large ST) but I do not wish to embark in interstage transformers and A2 with current drive...
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Amplifiers
- Tubes / Valves
- 6AS7 Mono Block's