Copland 501 no sound, NEWBIE - diyAudio
Go Back   Home > Forums > Amplifiers > Tubes / Valves

Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 21st June 2002, 06:48 PM   #1
diyAudio Member
 
Join Date: Jun 2002
Location: Near Amsterdam
Default Copland 501 no sound, NEWBIE

Sorry if this is an absolute newbie question, but recently I optained a Copland 501, but during testing of the amp, I didn't manage to get any sound out of it.

Before first power-up I inspected the board and messured the R31-R32, R131,R132.

Follwed a bais procedure, and adjusted everthing and it looked fine.

But while running the tubes 3 out of 7 tubes light up, to give more info, all four aeg 34 tubes don't light so it seems.

I'm I doing something wrong, are the aeg tubes faulty ?

Thanks in advance for advice
  Reply With Quote
Old 21st June 2002, 08:33 PM   #2
diyAudio Member
 
Join Date: Oct 2001
Location: .
Given that the 4 aeg34's, presumably these are the 4 EL34 power tubes, do not light up you need to check the heater supply or its fuse. If it is not obvious at sight you can track it down by tracing back from the heater supply pins for each tube, pins 2 and 7.

ray
  Reply With Quote
Old 21st June 2002, 08:37 PM   #3
diyAudio Member
 
Join Date: Jun 2002
Location: Near Amsterdam
Thanks for your answer but I found the problem like you said it had to do with a rusty fuse end, replaced the fuse cap and it works like a charm

Thanks again,

Bas
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Dead Copland CTA-501 Kevster Tubes / Valves 8 21st December 2006 03:44 PM
Suddenly, no output from Copland CTA-501 Kevster Tubes / Valves 9 29th October 2005 02:40 AM
copland 504 pamaz Tubes / Valves 0 23rd March 2004 08:55 PM
copland CVA 306 jouch Tubes / Valves 0 2nd December 2003 11:50 AM
Trouble biasing Copland CTA-501 Baard Tubes / Valves 4 9th May 2002 06:44 PM


New To Site? Need Help?

All times are GMT. The time now is 01:43 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2