Hi ,
I really need your help in building my first amplifier ...
I want a 2 x 100 W 8 Ohm Tube amplifier .. or less .. i don't know ...
Please .. please .. help me with the schematic and all the info ... transformers in special ... i need help in makeing them ...
This is my first tube project ...
THANKS !!!!
I really need your help in building my first amplifier ...
I want a 2 x 100 W 8 Ohm Tube amplifier .. or less .. i don't know ...
Please .. please .. help me with the schematic and all the info ... transformers in special ... i need help in makeing them ...
This is my first tube project ...
THANKS !!!!
Hi,
Only one?
Have a look under KT88, 6550, EL34/6CA7, etc. :
CLAUDIO BONAVOLTA
Cheers,
Give an example .. a schematic please
Only one?
Have a look under KT88, 6550, EL34/6CA7, etc. :
CLAUDIO BONAVOLTA
Cheers,
here's one for up to 70W depending on setup. but it can be expensive depending on wich parts you use.
http://www3.sympatico.ca/r.godmaire/VDV3070.htm
but as the other guys told you, do you really need 100W???
http://www3.sympatico.ca/r.godmaire/VDV3070.htm
but as the other guys told you, do you really need 100W???
do you really need 100 watts?
probably, if you're going to drive Magnepan or B&W Nautilus. i have two friends who uses those speakers. the B&W is driven by a 100wpc Jadis and the Magnepan is driven by a 150wpc Audio Research.
another friend has Sonus Faber Electa Amator II and is driven by a Conrad Johnson 75wpc.
then i have this friend who drives his Sonus Faber Guarneri with a 300B
probably, if you're going to drive Magnepan or B&W Nautilus. i have two friends who uses those speakers. the B&W is driven by a 100wpc Jadis and the Magnepan is driven by a 150wpc Audio Research.
another friend has Sonus Faber Electa Amator II and is driven by a Conrad Johnson 75wpc.
then i have this friend who drives his Sonus Faber Guarneri with a 300B
try this one. only about 3.5W but accoring to most people that should be enough depending on your speakers. AND it's quite a good manual for a first-timer
(still havn't built my first....waiting on paycheck)
http://www.boozhoundlabs.com/howto/
(still havn't built my first....waiting on paycheck)
http://www.boozhoundlabs.com/howto/
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Amplifiers
- Tubes / Valves
- Help .. tube amplifier .. 1st !