|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
29th July 2004, 04:37 PM
|
#1 |
|
diyAudio Member
Join Date: Jun 2004
Location: Avila
|
Zout adapted for 2 EL34 80W Va=560V
Hello!!!
It's my second post in this forum... My problem is that the OT is damged of a Spanish guitar tube amp Sinmarc G-2160-C (80W with Va=560V). There would want to know which is the output suitable (Zp-p) for 2EL34 in push-pull class AB with 80W of output power and a tension of plate of 560V. I want select a OT... I have found this web but it does not come specified for 80W and Va=560V. http://tdsl.duncanamps.com/show.php?des=EL34 Which is the ideal Zout? Suggested 5000 ohms plate to plate... Thank you very much... |
|
|
29th July 2004, 05:36 PM
|
#2 |
|
diyAudio Moderator
|
It will depend on the output stage topology. If we assume pentode, then 5000 ohms is about right.
__________________
If there's a sucker born every minute, where do the rest of them come from? |
|
|
|
29th July 2004, 06:56 PM
|
#3 |
|
diyAudio Member
Join Date: Jun 2004
Location: Avila
|
Thank you
Thank you for your reply.
The output stage is the Marshall style, but I modified connected supressor grid on the bias voltage and other modification suggested in Tone-lounge. This modifications are after the OT fried. (injuried) Sorry for my poor English. The resistor grid is 5K6 and the resistor bias is 220K. The Rg2 is 100 Ohms, feed to a 560 ohm from center tap of OT. The plate voltage is around 560-580V. If you view the Marshall 2204 JCM800 schematic, it's my base. I wish that you have an idea of the topology of output stage... Thank you very much. |
|
|
|
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Calculating Zout for Pentode amp with NFB? | Jeb-D. | Tubes / Valves | 32 | 26th May 2012 01:48 PM |
| low zout vs output transfo | jeapel | Tubes / Valves | 6 | 6th February 2009 05:10 PM |
| help needed: hi Zin, lo Zout, hi swing driver for experiments | aletheian | Solid State | 5 | 21st July 2008 03:28 PM |
| El34 PP Vs. El34 PSE | alexmoose | Tubes / Valves | 47 | 6th September 2006 05:44 PM |
| Time for low Zout preamp | argo | Tubes / Valves | 40 | 11th December 2002 11:58 AM |
| New To Site? | Need Help? |
