diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Tubes / Valves (http://www.diyaudio.com/forums/tubes-valves/)
-   -   How do you properly ground a Tamura OPT? (http://www.diyaudio.com/forums/tubes-valves/37723-how-do-you-properly-ground-tamura-opt.html)

arnoldc 13th July 2004 05:03 AM

How do you properly ground a Tamura OPT?
 
i have been using the Tamura F-475 for some months now but the secondary (to the speaker) is floating.

the F-475 has pins for "E" and "G" and i suppose they're for earth and ground, respectively?

so do you connect the "E" to the chassis and "G" to the signal ground (via the input RCA ground)?

my MagneQuest DS-025's common is connected to the input RCA ground, which i suppose is the right thing to do. please correct this if i'm wrong.

cheers.

commstech 13th July 2004 03:43 PM

u are not wrong

arnoldc 15th July 2004 12:43 AM

hey thanks! is your comment for the tamura, magnequest or both?


All times are GMT. The time now is 02:32 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2