• WARNING: Tube/Valve amplifiers use potentially LETHAL HIGH VOLTAGES.
    Building, troubleshooting and testing of these amplifiers should only be
    performed by someone who is thoroughly familiar with
    the safety precautions around high voltages.

Anyone know anything about a 6AV5GA?

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Jump to Latest
Rod Coleman

Rod Coleman

Member
Joined 2004
Novar and Magnovals

Those fatter pins were down to us Euros with our "Magnoval" design. All else the same, but bigger pin diameter.

The EL/PL519 series is the most notable design using that base.

A nice Mullard PL504 in front of me has pins that measured 1,25mm - or 50 thou (mils) (0.050") in traditional money. Meanwhile, a Novar 6CJ6 appears to be ~ 1mm/40thou in the pins.
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Top Bottom