• WARNING: Tube/Valve amplifiers use potentially LETHAL HIGH VOLTAGES.
    Building, troubleshooting and testing of these amplifiers should only be
    performed by someone who is thoroughly familiar with
    the safety precautions around high voltages.

Sim... What am I doing wrong?

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Jump to Latest
M

mashaffer

Member
Joined 2004
tubiespad.angelfire.com/index.html
Using the triode curves derived from this model I should get close to 5W before clipping with 5K anode load. Tranny model has L ratio of 25:1 which should equal N right and lead to 5K with 8 ohm speaker right? Yet I only get about 1W out before the anode current cuts of clipping the output.
 

Attachments

  • 6LU8_TriodeMode.png
    6LU8_TriodeMode.png
    69 KB · Views: 122
  • SE_Schem.png
    SE_Schem.png
    81.5 KB · Views: 119
  • SE_Output.png
    SE_Output.png
    45.2 KB · Views: 107
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Top Bottom