Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum

Noise: cheap power inverter for series heater string
Noise: cheap power inverter for series heater string
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 16th May 2018, 10:59 AM   #11
Tubelab_com is offline Tubelab_com  United States
diyAudio Member
 
Tubelab_com's Avatar
 
Join Date: Jul 2005
Location: West Virginia panhandle
Stick the words "boost converter" into Amazon's search engine and see what turns up. There are plenty of "DC to DC 3.0-30 V to 5-35 V Output Voltage Adjustable Step-up Circuit Board" to choose from. Realize that the capabilities are probably exaggerated a bit, but many of these do work, and cost less than the individual parts would cost us to make one. The output is ground referenced which is OK, and these are probably cleaner than trying to use series wired tubes on 120 volts.

There are also several versions capable of making B+ voltage some are regulated and some are not. I have experimented with some of them, but not seriously enough to make a complete amp.

These things seem to come and go, and none of the simple unregulated versions that I bought almost 2 years ago are still listed. Neither are the Philips 240 volt inverters that I cannibalized for my 12 volt to 280 volt power supply which still works.
__________________
Tubelab, it's 5 year mission. To explore strange new tubes, to seek out new circuits and topologies, to boldly go where no tube has gone before......
  Reply With Quote
Old 16th May 2018, 03:47 PM   #12
kodabmx is offline kodabmx  Canada
diyAudio Member
 
Join Date: Oct 2011
Location: Toronto
In my experience, unless the inverter is square wave, it'll work fine. I had a UPS that used stepped sine (looks like a wedding cake) that I had an old tube amp plugged into. With pure sine from the outlet, there was audible 120Hz hum from the outputs, but when powered from the stepped sine inverter, it was silent. Apparently it's easier to filter for the built in RC filter.
  Reply With Quote

Reply


Noise: cheap power inverter for series heater stringHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
series 6.3V power supply to valve heater 02GF74 Tubes / Valves 12 4th December 2017 12:00 PM
Low Noise Tube B+ and Heater power supplies DualTriode Power Supplies 2 20th July 2017 07:44 AM
How do I calculate shunt resistor value in a heater series string Wigwam Jones Tubes / Valves 15 11th September 2015 03:55 PM
What is the ideal low-noise heater power for high-power output tubes? cyclecamper Tubes / Valves 37 18th January 2013 07:45 AM
String noise/squeek Robert Kesh Instruments and Amps 10 17th January 2013 05:46 PM


New To Site? Need Help?

All times are GMT. The time now is 02:32 PM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio
Wiki