Input stages - to decouple B+ or not? - diyAudio
Go Back   Home > Forums > Amplifiers > Tubes / Valves

Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 9th March 2004, 09:35 AM   #1
diyAudio Member
 
Join Date: Sep 2003
Location: London
Default Input stages - to decouple B+ or not?

My present amp has a 12b4 voltage stage (no cathode bypass) DC coupled to a concertina (split-phase). Most designs I've seen don't decouple the B+ supply between these stages, so I haven't (e.g. Morgan Jones EL84 amp with 6922 first stages). However, a tube designer I know strongly recommended doing so. I'd welcome some ideas about decoupling between stages, and why doing so/not doing so might sound better or have other advantages. I can also use chokes for decoupling - I have a few 10H 100mA - and I'm open to any other method. Andy
  Reply With Quote
Old 9th March 2004, 10:28 AM   #2
diyAudio Senior Member
 
fdegrove's Avatar
 
Join Date: Aug 2002
Location: Belgium
Hi,

In your case, direct coupled, I wouldn't decouple.
The direct coupling sets the grid bias of the next stage and relies on the difference between the voltage of the anode of the first stage and the grid voltage present on the next.

Since B+ is common to both any variation there will maintain the difference on both hence the bias is maintained.

Now if both stages were independent from each other, any change in B+ will upset this relation and correct bias will be lost momentarily.

Cheers,
__________________
Frank
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Voltage references for input and VAS stages kl Solid State 0 10th March 2009 03:19 AM
Input/Output Stages for Blackfin DSP maczrool Digital Line Level 7 23rd February 2009 08:10 PM
Pentode guys: important to decouple g2 supply between stages? leadbelly Tubes / Valves 4 27th September 2008 05:12 AM
Power amp input stages from National Calvin Solid State 1 14th July 2008 06:18 PM
Cascoded LTP input stages Mindaugas Solid State 20 13th April 2007 01:21 AM


New To Site? Need Help?

All times are GMT. The time now is 09:34 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2