• WARNING: Tube/Valve amplifiers use potentially LETHAL HIGH VOLTAGES.
    Building, troubleshooting and testing of these amplifiers should only be
    performed by someone who is thoroughly familiar with
    the safety precautions around high voltages.

Pre-amp selection

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
diyAudio Senior Member
Joined 2002
Hi,

My question is that i noticed the STA1 has 3 tubes, while the Bottlehead preamp has 2 tubes. Will this make a difference? WHich do you recommend?

Less is more...;)

Since the BH doesn't include tone controls, they do not need to compensate for the insertion loss.

At the end of the day the BH is bound to sound more transparent than the LH, the latter is more positioned towards the guitar amp crowd, I think.

Other than that, the BH has built itself a good rep with an enthousiastic following.

Cheers,;)
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.