6K output transformer for 6L6 ?? - diyAudio
Go Back   Home > Forums > Amplifiers > Tubes / Valves

Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 26th March 2002, 05:25 PM   #1
diyAudio Member
 
Join Date: Dec 2001
Location: Hong Kong
Cool 6K output transformer for 6L6 ??

Hello, if use 6K output transformer in 6L6 (SE) is good ? some people told me it is good in bass, is it ture ?

EL34 , EL84 , KT88 also can use 6K output transformer in (SE) ?

Thanks !!
  Reply With Quote
Old 26th March 2002, 10:26 PM   #2
diyAudio Member
 
Join Date: Oct 2001
Location: Melbourne, Australia
Billy,

There is no best transformer for a given tube in a given circuit. There is an optimum load for distortion, there is an optimum load for power output... and so on.

Some 6 years ago, I designed an output stage using 6L6 for one of my friends. 4200 ohms was the load with low amounts (I cannot remember exactly how much) of feedback.

Usually, the higher the load, the better the frequency response and the lower the distortion and power output. It is really your choice. Is there any reason for you to consider a tetrode for a SE amp? You could avoid feedback using triodes.

Mohan
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Difference between SE output transformer and push-pull output transformers hilbert_mostert Tubes / Valves 12 8th March 2009 06:10 PM
3C24 in a SE output stage - output transformer impedance recommendation !!! aldovan Tubes / Valves 15 6th September 2008 11:18 AM
Adding secondary of output transformer into cathodes of output stage ? Eico ST-70 freddymac406 Tubes / Valves 3 21st April 2007 07:15 PM
Can An Output Transformer Change A Voltage Amp's Output Impedance From 0.1 To 47 Ohms kelticwizard Everything Else 11 25th March 2007 06:17 AM
toroid Transformer as output Transformer for tube preamp? tone Tubes / Valves 15 2nd February 2003 05:36 AM


New To Site? Need Help?

All times are GMT. The time now is 08:39 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2