diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Tubes / Valves (http://www.diyaudio.com/forums/tubes-valves/)
-   -   6K output transformer for 6L6 ?? (http://www.diyaudio.com/forums/tubes-valves/2873-6k-output-transformer-6l6.html)

billy 26th March 2002 04:25 PM

6K output transformer for 6L6 ??
 
Hello, if use 6K output transformer in 6L6 (SE) is good ? some people told me it is good in bass, is it ture ?

EL34 , EL84 , KT88 also can use 6K output transformer in (SE) ?

Thanks !!

Mohan Varkey 26th March 2002 09:26 PM

Billy,

There is no best transformer for a given tube in a given circuit. There is an optimum load for distortion, there is an optimum load for power output... and so on.

Some 6 years ago, I designed an output stage using 6L6 for one of my friends. 4200 ohms was the load with low amounts (I cannot remember exactly how much) of feedback.

Usually, the higher the load, the better the frequency response and the lower the distortion and power output. It is really your choice. Is there any reason for you to consider a tetrode for a SE amp? You could avoid feedback using triodes.

Mohan


All times are GMT. The time now is 08:30 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2