• WARNING: Tube/Valve amplifiers use potentially LETHAL HIGH VOLTAGES.
    Building, troubleshooting and testing of these amplifiers should only be
    performed by someone who is thoroughly familiar with
    the safety precautions around high voltages.

First build from scratch.

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Hi to everyone.
I am looking for some advice to help me build my first linestage [ preamp] from scratch. I have built a Bottlehead Foreplay kit and now want to try my hand at my own build. I have the following requirements:
1/ I want to improve on the Foreplay.
2/ I will be using this to drive a 300B push pull amp that i am putting together with a friend.
3/ I don`t need a phono stage but i would like 3 inputs.
4/ Simple is better due to my lack of experience.
5/ I will be using my HK730 solid state receiver initially and may even end up biamping my speakers with the 300Bs.
I can read schematics and have decent soldering skills so please throw some ideas/ schematics my way to get me started.
Oh yes, i did research this and found that i don`t have the experience to choose one design over another.

Steve. [Castlesteve]
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.