swapping from my GM-70 socket thread to a description of my work on a 211 amplifier.
Building today 4 monoblocs, for a friend and for my new/old greencone loudspeakers (ebay 399€/pair).
Some fotos and the link to the original iGoliath amplifier from Peter Gelder (in dutch only!):
iGoliath 211 triode versterker (Peter Gelder) - Audio Creative
Building today 4 monoblocs, for a friend and for my new/old greencone loudspeakers (ebay 399€/pair).
Some fotos and the link to the original iGoliath amplifier from Peter Gelder (in dutch only!):
iGoliath 211 triode versterker (Peter Gelder) - Audio Creative
... working on the power supplies and waiting for the copper parts (IT 25841 - 252€/pair and OT 28957 - 450€/pair) from:
Audio Transformers - Automatic Electric Europe - transformatoren
The end price of a stereo pair should not exceed 2000€ (custom sockets, custom toroid, Mundorf and WIMA DC-LINK capacitors, AMTRANS resistors, PCB to reduce cabling)...
Audio Transformers - Automatic Electric Europe - transformatoren
The end price of a stereo pair should not exceed 2000€ (custom sockets, custom toroid, Mundorf and WIMA DC-LINK capacitors, AMTRANS resistors, PCB to reduce cabling)...
...finally, the teflon socket is finalized.
And I prefer definitively the Melomania amplifier design (cheaper OT).
And I prefer definitively the Melomania amplifier design (cheaper OT).
Attachments
Err--What in the world is an 'iGoliath'....? It must be Trendy--Its got an 'i' at the start.....
--just like all that plastic sand rubbish that seems to be permanently attached to peoples hands these days.....
Google search only turns up this thread amongst loads of irrelevant 'Farcecrook' pages.....
--just like all that plastic sand rubbish that seems to be permanently attached to peoples hands these days.....
Google search only turns up this thread amongst loads of irrelevant 'Farcecrook' pages.....
The design is universal: replace driver PCB, modify the power supplies (high voltage supply for driver up to 600V; for power tube up to 1200V; raw DC supply for Rod coleman´s DHT-Supply); interstage or anode choke, you decide; 805A, 845 or 211?
The iron is from Toroidy...
The iron is from Toroidy...
Attachments
English version.
https://translate.google.co.uk/tran...luft-211-Amp/melomania.htm&edit-text=&act=url
Regards
M. Gregg
https://translate.google.co.uk/tran...luft-211-Amp/melomania.htm&edit-text=&act=url
Regards
M. Gregg
The design is universal: replace driver PCB, modify the power supplies (high voltage supply for driver up to 600V; for power tube up to 1200V; raw DC supply for Rod coleman´s DHT-Supply); interstage or anode choke, you decide; 805A, 845 or 211?
The iron is from Toroidy...
Hi,
very nice and good jobs 3D model's, very detail.
Goliath amp from Triode Dick, I fanatic with designs from him.
DC supply filament from Rod coleman' DHT very good and quite, I've tried on my 300B power.
I expect you to project 211, thank's and keep to share, because I also want to make 211 too.
but I have not been chosen for the driver.
regards
Ed
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Amplifiers
- Tubes / Valves
- 211 based on iGoliath Amplifier