|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum |
| diyAudio Sponsor | ||
|
||
 |
|
|
Thread Tools | Search this Thread |
24th December 2003, 01:32 AM
|
#1 |
|
diyAudio Member
Join Date: Dec 2003
Location: MA
|
High gain Tube amp problems
I am trying to get a compressed high gain tone (think Mesa) from my Mig 100. I modded the schematic to the same specs as a JCM800. I also changed the CF to another gain stage and it still is weak. It sounds buzzy, not tight. Maybe I should mod the power amp as well? Can anyone post some schematics of amps that have been built and are known to sound tight, and only uses two 12AX7's? Thanks alot.
(Also, I apologize if this comes up often or is too vague, I am new here). |
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Very High-Gain PNP Transistors... | EchoWars | Solid State | 16 | 6th July 2009 04:27 PM |
| Gain Problems | allyourzigg | Tubes / Valves | 5 | 15th December 2008 03:49 PM |
| high gain 2nd order high pass active filter topology | sreten | Solid State | 21 | 23rd March 2006 02:26 AM |
| Problems With Simple Gounded Cathode Gain Stage | dr._sleep | Tubes / Valves | 4 | 23rd January 2006 09:31 PM |
| What problems can happen at high gain? | cpemma | Chip Amps | 1 | 26th August 2004 01:58 PM |
| New To Site? | Need Help? |
| Page generated in 0.06291 seconds (66.53% PHP - 33.47% MySQL) with 10 queries |
