diyAudio

diyAudio (http://www.diyaudio.com/forums/index.php)
-   Tubes / Valves (http://www.diyaudio.com/forums/tubes-valves/)
-   -   High gain Tube amp problems (http://www.diyaudio.com/forums/tubes-valves/24733-gain-tube-amp.html)

firebird josh 24th December 2003 12:32 AM

High gain Tube amp problems
 
I am trying to get a compressed high gain tone (think Mesa) from my Mig 100. I modded the schematic to the same specs as a JCM800. I also changed the CF to another gain stage and it still is weak. It sounds buzzy, not tight. Maybe I should mod the power amp as well? Can anyone post some schematics of amps that have been built and are known to sound tight, and only uses two 12AX7's? Thanks alot.

(Also, I apologize if this comes up often or is too vague, I am new here).


All times are GMT. The time now is 06:09 AM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 18.75%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio

Wiki