Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum

CCS into a VR with Interstage question
CCS into a VR with Interstage question
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 20th September 2013, 08:11 AM   #1
eeyore is offline eeyore  Australia
diyAudio Member
Join Date: Aug 2005
Default CCS into a VR with Interstage question

Hi, I am in the process of designing an 45 DHT amp using a C3g as the driver tube. The current intent is to use a 1:1 interstage transformer to couple between the C3g and the 45. I have a specific question regarding the use of a VR tube and CCS on the driver stage. My question is this, if I use a 0D3 to get a regulated 150 V plate voltage for the C3g.

In my understanding, in this situation, say we need around 10 mA for the 0D3 and the C3g is biased around 10 mA also. If I were to use a CCS before the VR tube and the interstage transformer, would I set the CCS at 20 mA, and the additional voltage swing and current swing would be provided by the interstage transformer. Am I right in this regard?

If one doesn't use a interstage transformer, I understand that the VR tube has to conduct the full range of current swing on the C3g tube. For example, if the swing is +/- 5 mA for the C3g biased at 10mA, and the would be 5 to 15 mA, therefore, the VR tube would need to be biased at 15 mA (10 mA minimum, plus 5 mA), so that with the plus and minus 5 mA, would not cause the 0D3 to have less than 10 mA across it. So, in this example, if I were to use a CCS, the CCS should be set to 25 mA.

Am I correct in my assumptions above? Or do I have it totally wrong? Thanks for any input.
  Reply With Quote


CCS into a VR with Interstage questionHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
VR Tube Question coldcathode Tubes / Valves 7 6th December 2011 09:34 PM
Question about a VR screen supply athos56 Tubes / Valves 23 28th February 2009 04:09 PM
Interstage topology question rdf Tubes / Valves 23 8th May 2007 04:28 AM
shunt regulator using VR tubes (with ccs like g pimm) and circuit load jarthel Tubes / Valves 2 23rd April 2007 04:33 PM
Interstage resistor question Ralph Tubes / Valves 2 27th August 2003 10:36 AM

New To Site? Need Help?

All times are GMT. The time now is 04:23 PM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio