Optimal Operating Point for E280F Driver for 300B Single End Amplifier - Page 2 - diyAudio
Go Back   Home > Forums > Amplifiers > Tubes / Valves

Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 23rd July 2013, 03:41 PM   #11
Raj1 is offline Raj1  United Kingdom
diyAudio Member
 
Join Date: Jan 2003
Location: UK
I use D3A triode wired with battery grid bias (silver oxide 1.5V coin cell) with 170~180v on the plate - sounds very nice.
  Reply With Quote
Old 28th July 2013, 10:49 AM   #12
regal is offline regal  United States
diyAudio Member
 
Join Date: Jan 2004
Location: MD
Quote:
Originally Posted by tomchr View Post
d3A in triode is nice as well.

~Tom
The problem with D3A is it runs out of cathode bias, it has a lot of gain but since the distortion rises as the grid reaches zero adding a preamp won't help a D3a-300B amp scale. The 6e5p may be better for of the triode wired pentodes.

If you want to stay away from pentodes, I am liking the JCC99, 6N6P, 12BH7A, and ECC88 types. I still think there is something to be said for a good triode vs a pentode wired as triode. One that is hard to find of this same series is the E182CC (a good one has a gain of 24.) All of these have a healthy g-k bias and can benefit from a peamp or source with a high output.
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
E280F Triode mode operating point frankmalz Tubes / Valves 2 20th July 2013 09:50 PM
Front End DC Operating Point Current Magnitudes acoustixman Solid State 1 6th December 2011 11:10 AM
6SL7 operating point in FCUPS 300b amp mattattnet DIY HiFi Supply 3 30th March 2011 12:21 AM
300B preamp - best operating point mkollmaier Tubes / Valves 8 20th September 2010 08:14 PM
Optimal operating point for 7N7/6SN7? pftrvlr Tubes / Valves 5 16th December 2008 04:43 PM


New To Site? Need Help?

All times are GMT. The time now is 10:01 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2