An Apple MACmini shell gave me a lot reverie, I put it into a small tube amp, there are many photos of the production process for everyone to share.
An externally hosted image should be here but it was not working when we last tested it.
Seen from behind, I have transformed into a tube amp output
Designed for a very different positioning methods
Designed for a very different positioning methods
Designed for a very different positioning methods
Output transformer
Power Transformers
New method
Use RCA 6MD8
Internal circuits are not
ok。light。
inside
Last edited:
That is a special build. I love it!
thanks!
It is my handmade one of a dozen tube amps. Many other types of tube amps I will go through texture up.
This tube amp with push-pull output power 6W +6 W, toroidal transformer, because my hand is only a 230v-110v voltage, so using a voltage doubler rectifier. Rectifier after voltage 285v.
Noise level 0.02mv, I use 15 inches speakers, sensitivity 97db, still can not hear any noise.
This tube amp with push-pull output power 6W +6 W, toroidal transformer, because my hand is only a 230v-110v voltage, so using a voltage doubler rectifier. Rectifier after voltage 285v.
Noise level 0.02mv, I use 15 inches speakers, sensitivity 97db, still can not hear any noise.
An Apple MACmini shell gave me a lot reverie, I put it into a small tube amp, there are many photos of the production process for everyone to share.
....
Really cool build there!!
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Amplifiers
- Tubes / Valves
- Apple macmini become to 6MD8 tube amp