I found a strange thing on eBay; search for "SPDIF output tube stage,6S31B".
If I understand correctly what this is for, it's one of the most curious way I've ever seen tubes to be sold to audio people. =)
This forum is full of knowledgeable people, can somebody explain to me where the tube sound comes in?
If I understand correctly what this is for, it's one of the most curious way I've ever seen tubes to be sold to audio people. =)
This forum is full of knowledgeable people, can somebody explain to me where the tube sound comes in?
Yeah, it does seem that way. It does kinda look like a tube driven SPDIF.
Here is the item with a photo and a diagram.
SPDIF Output Tube Stage 6S31B | eBay
Here is the item with a photo and a diagram.
SPDIF Output Tube Stage 6S31B | eBay
... and the sound is "warmer and softer" of course ! This is pure audiophile B.S What's next ? A tube CD player spindle motor driver for a more analog sound ? A tube powered remote-control with photomultiplier receiver ? A thyratron controlled power switch ?
And by the way, they also have a "low jitter tube clock" ...
And by the way, they also have a "low jitter tube clock" ...
And by the way, they also have a "low jitter tube clock" ...
Hey, can I use a nixie tube for that?
jeff
The dynamic contrast between ones and zeros is enhanced, with the ones standing out against a blacker background. The increased detail in the digits make this a worthwhile upgrade.
If it's cheap, it's an interesting novelty, akin to those clacking balls-on-strings made for executive desktops.
If it's cheap, it's an interesting novelty, akin to those clacking balls-on-strings made for executive desktops.
Somehow, I find that strangely appealing. Much like the ilea of recasing a cellphone into something like shown below, with authentic ringtone.A tube powered remote-control with photomultiplier receiver ?
Is anachrotechnophilia even a word, or is it just me?
Attachments
I suspect the idea comes from Lukasz Fikus "Lampizator" who several years ago wrote an article about tubed SPDIF output: CD Transport Digi-Lampizator
If the original SPDIF source is competent then the best the buffer can do is avoid damaging the signal too much. If the source is really bad then the buffer might just improve it, but then you could probably assume that the rest of the source device is poorly engineered too. A 75ohm driver is not rocket science so a designer getting that wrong is unlikely to get everything else right.
I'm not sure that a tube C.F with 10V (they recommend 9 to 15 volts) anode supply is the best interface for driving a 75 ohms load. The circuit uses a toroid pulse transformer for coupling which is standard practice. Such transformers can be best driven with high speed gates in parallel or discrete transistor circuits. Performance will be better but not so "warm and soft" as with the tube circuit.
I was asked some time ago to design a tube based spdif circuit. I didn't do it, stupid if somewhat entertaining idea... IMO.. And if you were going to do it something like a D3A, 7788 or 12BY7A as a pentode connected CF makes a lot more sense. (Well not really, but if you must..)
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Amplifiers
- Tubes / Valves
- Tube SPDIF output