B&K 650 tube tester - diyAudio
Go Back   Home > Forums > Amplifiers > Tubes / Valves

Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 18th April 2013, 07:17 AM   #1
diyAudio Member
 
Join Date: Feb 2013
Default B&K 650 tube tester

Hey folks: I am restoring a 650 tube tester and am having some issues. Namely that the schematic, and parts list, and the tester itself, don't all match up so as to enable me to restore the tester accurately.

R10 Not my biggest problem but. In the tester unit itself I found it to be degraded and almost double the value called out on the schematic and the color code on the resistor. Then while checking I find that a service update calls for testers previous to the 6000 SN to have the value changed from 100K 10% to 120K 5%, OK, and the parts list calls it out as 120K 5%. But in the tester unit itself (SN 202934) it has a 180K 5% resistor that had drifted to 223K. I evaluated the circuitry and opted to replace it with a 180K that tested at 179,023 ohms, well within 1% value. That is the goal I am attempting. I would like to bring every component within 1% and then a 1% accuracy in calibration should yield a tester that could discern mutual conductance close to 1% for matching tubes for stereo applications and finals in ham radio gear.

The second problem I have ran into is a little more perplexing in that while reading the service bulletin on R10 it states that R11 should also be changed from 22K to 27K. Now the real problem. The parts list calls out R11 at 27K but I can not find any R11 on the schematic. I also can not find any 22K or 27K resistor on the schematic or in the tube tester unit itself - ? ? I have a feeling that this will not be the last problem I run into on this restoration since I am only about half way through it. So I decided I should go in search of an expert on the subject. So here I am, looking

Any help would be greatly appreciated.

Thanks

Rowdy
  Reply With Quote
Old 18th April 2013, 12:25 PM   #2
Cobra2 is offline Cobra2  Norway
DIY !
diyAudio Member
 
Cobra2's Avatar
 
Join Date: Apr 2002
Location: Stavanger, Norway
Send a message via Skype™ to Cobra2
Changes thru production-years...
I would not bother doing all that 1% stuff, it will never be an 1% instrument anyway.
Hardly think my Amplitrex is 1%...

Arne K
__________________
Don't believe everything you think...
  Reply With Quote
Old 18th April 2013, 06:13 PM   #3
diyAudio Member
 
Join Date: Aug 2010
Location: Near Eindhoven, the sanctum of the pentode. and among that other things.
Send a message via Skype™ to v4lve lover
1% That's delusional.
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
B&K 500 Tube Tester Calibration Captn Dave Tubes / Valves 4 4th May 2011 04:27 AM
B&K Tube Tester denny9167 Tubes / Valves 2 31st January 2011 08:08 PM
B&K 606 Tube Tester pjanda1 Swap Meet 5 30th March 2010 05:21 PM
B&K 747 tube tester tigro Tubes / Valves 2 24th November 2009 01:04 PM
B&K 650 tube tester not working, need help War Bird Radio Tubes / Valves 1 11th April 2004 11:56 PM


New To Site? Need Help?

All times are GMT. The time now is 12:26 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2