Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum

Providing both balanced and unbalanced inputs
Providing both balanced and unbalanced inputs
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 28th February 2013, 11:25 AM   #1
Sassenach is offline Sassenach  Scotland
diyAudio Member
 
Join Date: Dec 2011
Default Providing both balanced and unbalanced inputs

My fully-balanced power amp design has both a balanced input (via an XLR socket) and an unbalanced input (via phono/RCA). At present, I have a resistor network that eliminates the need for any input selection switching, but the problem is that it is wasteful of signal level and reduces the effective gain of the amplifier. I could throw away the resistors and simply have a switch that shorts the "cold" pin of the XLR socket to ground when the unbalanced input is being used, but this arrangement isn't foolproof.

I am interested to hear people's views on the best circuit configuration for connecting the two sockets to the input stage. (By the way, I am aiming for a balanced input sensitity of 2V and an unbalanced sensitivity of 1V.)
  Reply With Quote
Old 28th February 2013, 03:15 PM   #2
DavesNotHere is offline DavesNotHere  United States
diyAudio Member
 
Join Date: Jun 2011
an input transformer on rca. secondary connects to 2&3 on xlr.

another way: isolate the rca from the chassis. rca tip to 2 rca sleeve to 3.
  Reply With Quote
Old 28th February 2013, 04:25 PM   #3
Shoog is offline Shoog
diyAudio Member
 
Shoog's Avatar
 
Join Date: Aug 2002
Location: Eire
Quote:
Originally Posted by DavesNotHere View Post
an input transformer on rca. secondary connects to 2&3 on xlr.

another way: isolate the rca from the chassis. rca tip to 2 rca sleeve to 3.
This is the way I have done it. The rca gets its ground reference at the source end. This way you can just connect the rca to the xlr without issue.

Shoog
  Reply With Quote

Reply


Providing both balanced and unbalanced inputsHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
unbalanced/balanced to balanced converter kevin gilmore Analog Line Level 4 26th February 2013 09:31 PM
Aleph5 question - always ground -in if using unbalanced inputs? Michael Vogel Pass Labs 6 3rd February 2004 10:38 PM
unbalanced/balanced/unbalanced conversion using transformers vladimir Solid State 10 27th February 2003 07:54 PM
unbalanced or balanced theturtle Everything Else 4 5th January 2003 05:52 PM
Zen Balanced Line Stage Balanced vs Unbalanced macka Pass Labs 28 11th December 2002 07:18 AM


New To Site? Need Help?

All times are GMT. The time now is 07:00 PM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio
Wiki