diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Tubes / Valves (http://www.diyaudio.com/forums/tubes-valves/)
-   -   Tube Technology Genesis 100w monoblock manual? (http://www.diyaudio.com/forums/tubes-valves/230815-tube-technology-genesis-100w-monoblock-manual.html)

ricohman 25th February 2013 02:32 PM

Tube Technology Genesis 100w monoblock manual?
 
I have a pair of these monoblocks and I have a lot of questions. I do not have the manual so I am looking for one, or a copy of one.
My first question is bias? I have the meter but not the numbers.
Would the values on the back of the meter the read "Genesis" be for my amps?
I am located in Saskatchewan, Canada. So I have no local resources.

ricohman 25th February 2013 03:38 PM

And this is a pic of my amps. Not sure if they are early or later models of this amp as I have seen two different face plates.
http://i23.photobucket.com/albums/b4...psef795676.jpg

speakerfritz 25th February 2013 11:22 PM

Tube Technology Genesis 100w monoblocks? - AudioKarma.org Home Audio Stereo Discussion Forums

the above link has pictures of the amp and a bias adjust device. in another article I read amp from the same manufacturer uses the same device with a setting of #3 which is believed to represent 30ma in the discussed example. so the only thing I can tell you is to review the data in the above link and recognize that the amp runs in class AB, so the tube bias will not be very hot at all. you can buy bias probes on ebay if you do not have the illustrated bias adjust device.


All times are GMT. The time now is 08:29 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2