|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
26th January 2013, 04:37 PM
|
#1 |
|
diyAudio Member
Join Date: Jan 2013
|
Marantz 8b Electrolytics
Hi, Just replaced selenium rect.with a 1n4007 diode. About to replace C17 atwo section 20uf @150vdc cap.I'm using two seperate Illinois 22uf @500volt caps. Want to make sure I'm Reading the schematic correctly. First cap: positive side between diode and resistor, negitive side to blue wire and a white wire that goes to bias pots. Second cap :Positive side after 1k resistor which goes to ground . negitive side soldered to neg side of cap 1. Thanks.....Rob
|
|
|
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Marantz 8b power transformer | mr2racer58 | Tubes / Valves | 35 | 13th September 2011 01:11 AM |
| Marantz 8b feedback circuit | mr2racer | Tubes / Valves | 10 | 12th September 2011 04:31 AM |
| Marantz 8b tubes | mr2racer58 | Tubes / Valves | 2 | 14th March 2010 10:08 PM |
| Marantz 8b operating voltages | yup | Tubes / Valves | 17 | 12th September 2006 09:03 PM |
| Custom hand wired Marantz 8b circuit -needs work-with tung-sol 6sn7 | RogerWilco | Swap Meet | 3 | 26th April 2006 03:42 AM |
| New To Site? | Need Help? |
