• WARNING: Tube/Valve amplifiers use potentially LETHAL HIGH VOLTAGES.
    Building, troubleshooting and testing of these amplifiers should only be
    performed by someone who is thoroughly familiar with
    the safety precautions around high voltages.

Hammond L-112

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
They are not the same amplifier. I use 2 L100 amps in my hi-fi They make great amps, I was not able to find diagrams on mine, I was able to look at them and see what i needed to change. If you have time on your hands, do what i do, get a big pad of graph paper, 24"by 36" and draw out the schematic. Then as you mod the amp(s) you can add to the schematic (or remove things) Keep it in your notes because it will be useful later. I do not know of a source for the schematic for this unit. What is your goal with the amp? Hi fi? maximum distortion? Perhaps I can help.

Disregard the part about not having a schematic and check this site.


http://captain-foldback.com/Hammond_sub/hammond_schematics.htm
 
Last edited:
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.