Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum

Fixing Sneaky Oscillation in P-P Amplifiers
Fixing Sneaky Oscillation in P-P Amplifiers
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 4th January 2013, 11:09 PM   #1
wrenchone is online now wrenchone  United States
diyAudio Member
 
wrenchone's Avatar
 
Join Date: Feb 2004
Location: Silicon Valley
Default Fixing Sneaky Oscillation in P-P Amplifiers

I have a P-P amp I've been tinkering with that has a snarky burst of oscillation that occurs on only one half-cycle. I recall SY saying in one thread that this could be due to mismatch between transformer primary halves. The problem and its solution are deeply buried in a thread here somewhere, and the problem is frustrating enough that the problem and solution deserve a thread of their own for future frustrated amp builders.
SY, can you restate your suggestion to fix this problem? I think that a series RC across each primary half, or one between plates might be the solution.
  Reply With Quote
Old 4th January 2013, 11:15 PM   #2
astouffer is offline astouffer  United States
diyAudio Member
 
astouffer's Avatar
 
Join Date: Jun 2004
Location: Pittsburgh, crumbling wasteland
If the primary resistance is off you could add a series resistor to try balancing it.
  Reply With Quote
Old 4th January 2013, 11:48 PM   #3
HollowState is offline HollowState  United States
diyAudio Member
 
HollowState's Avatar
 
Join Date: Aug 2006
Location: Taxland, New Jersey
I remember something about this. At least one suggestion was to add grid stopper resistors to the output tubes if not already there. Values around 1K to 1.5K are common. If pentode operated, I'd also consider smaller ones on the screens and perhaps even a small inductor at the plate terminal in series with the OPT.
__________________
There cannot, and never will be, any progress in society, vis-a-vis racism, so long as the concept of celebrating Diversity -- in it's current, politically-correct, deliberate, punitively extractive form -- continues.
  Reply With Quote
Old 4th January 2013, 11:56 PM   #4
Wavebourn is offline Wavebourn  United States
Designer & Technologist
diyAudio Member
 
Wavebourn's Avatar
 
Join Date: Sep 2006
Location: Pleasant Hill, CA
Fixing Sneaky Oscillation in P-P Amplifiers
What's the frequency of oscillations?
__________________
Nothing in the universe is perfect. The ideal things are the ones that are most optimal. Optimization criteria, what matters. When I hear "No Compromise Design", I want to take a sledgehammer and test how impact-proof it is.
  Reply With Quote
Old 5th January 2013, 12:06 AM   #5
wrenchone is online now wrenchone  United States
diyAudio Member
 
wrenchone's Avatar
 
Join Date: Feb 2004
Location: Silicon Valley
A few MHz...
  Reply With Quote
Old 5th January 2013, 03:45 AM   #6
wrenchone is online now wrenchone  United States
diyAudio Member
 
wrenchone's Avatar
 
Join Date: Feb 2004
Location: Silicon Valley
One of the things I might try before anything else is to increase the output tube grid stopper values to a value similar to that of the Red Light District, with the intent of limiting grid current during positive grid excursions. This may sufficiently squelch the output tubes such that no further action is necessary. The grid stoppers are probably a k or two right now, maybe less. I'd have to look at the half-built carcass to tell, and it's down in the basement, where it'll stay until I get to it...
  Reply With Quote
Old 5th January 2013, 04:56 AM   #7
astouffer is offline astouffer  United States
diyAudio Member
 
astouffer's Avatar
 
Join Date: Jun 2004
Location: Pittsburgh, crumbling wasteland
What does the burst look like?
  Reply With Quote
Old 5th January 2013, 05:44 AM   #8
Wavebourn is offline Wavebourn  United States
Designer & Technologist
diyAudio Member
 
Wavebourn's Avatar
 
Join Date: Sep 2006
Location: Pleasant Hill, CA
Fixing Sneaky Oscillation in P-P Amplifiers
If few MHz it is not transformer ringing. Either grid stoppers would help, or a cap directly from anode to the feedback input, to bypass feedback through transformer. Can be also result of some parasitic feedback, so shielding may help.
If you remove GNFB, does it stop or gets worse?
__________________
Nothing in the universe is perfect. The ideal things are the ones that are most optimal. Optimization criteria, what matters. When I hear "No Compromise Design", I want to take a sledgehammer and test how impact-proof it is.
  Reply With Quote
Old 5th January 2013, 12:45 PM   #9
20to20 is offline 20to20  United States
diyAudio Member
 
Join Date: Jun 2010
Location: W-S, NC
What are the lowest and highest test frequencies that it occurs on? Where is the first point in the circuit you can detect it? Any unusual circuit design elements, components? Apart from being a P-P amp, we don't have much to go on.

EDIT: Does it exist at all output power levels? Does it start at the crossover point, the positive or negative half-cycle, top ot bottom of the wave?

Last edited by 20to20; 5th January 2013 at 01:11 PM.
  Reply With Quote
Old 5th January 2013, 02:33 PM   #10
LinuksGuru is offline LinuksGuru  Europe
diyAudio Member
 
Join Date: Aug 2008
Can you please post a schematic and photo of layout?
  Reply With Quote

Reply


Fixing Sneaky Oscillation in P-P AmplifiersHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
pro amplifiers vs. home audio amplifiers bonsai171 Solid State 26 25th February 2004 08:24 PM
Paradigm amplifiers? Anthem amplifiers? Corn-Picker Solid State 2 24th January 2004 03:10 AM
Many smaller amplifiers vs. bigger amplifiers. djdan Solid State 9 17th September 2002 04:40 PM


New To Site? Need Help?

All times are GMT. The time now is 09:28 PM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio
Wiki