diyAudio (
-   Tubes / Valves (
-   -   Quicksilver M135 Schematic? (

Unimog 7th December 2012 04:18 AM

Quicksilver M135 Schematic?
Does anyone have a Quicksilver M135 schematic available? I would very much appreciate the assistance.

Palustris 7th December 2012 03:03 PM

Years ago I asked Mike Sanders for a schematic for my KT88 amps. He claimed that he had never drawn one up except on a "napkin" and so none was available. He suggested that I draw out my own. So that's what I did...

Unimog 7th December 2012 05:44 PM

I was hoping to find someone who had traced the schematic, just as you suggest. I don't have something complete enough to produce a schematic.

Unimog 8th December 2012 09:56 PM

Is there anyone who owns an M135 who is interested tracing the schematic if you have not already? I would be happy to assist.

Unimog 15th September 2014 01:33 AM

Unfortunately, my incomplete Quicksilver M135's remain incomplete. Is there anyone out there now who can assist with a schematic?

Unimog 8th November 2014 12:33 AM

Would anyone be willing to pass along some good resolution images of the underside of a Quicksilver M135?

Jallen78 31st January 2016 04:28 PM

Did you finish your M135 after all this time? If in need of photos, I can help. Jallen78

All times are GMT. The time now is 10:46 PM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 18.75%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio