Member
Joined 2009
Paid Member
I would use a 6H30Pi
do not look at the values of resistors: Rolleyes:
EDIT YOUR VERSION
the CFP is derived from
https://picasaweb.google.com/103176186685392443797/TheEndMKII1991HighFidelity78JulyAugustIssue#
The tubes work very well in low-voltage
do not look at the values of resistors: Rolleyes:
EDIT YOUR VERSION
the CFP is derived from
https://picasaweb.google.com/103176186685392443797/TheEndMKII1991HighFidelity78JulyAugustIssue#
The tubes work very well in low-voltage
Attachments
Let's ask the OP:
1. Have you built it? If so, what did it sound like?
2. Have you simulated it? If so, how well did it work?
3. Have you calculated anything (e.g. gain)? If so, what?
If none of the above, what is your purpose in posting? It clearly isn't education, as you are not explaining anything. It can't be bragging, as the circuits are generally poorly designed or just ripped off other people.
1. Have you built it? If so, what did it sound like?
2. Have you simulated it? If so, how well did it work?
3. Have you calculated anything (e.g. gain)? If so, what?
If none of the above, what is your purpose in posting? It clearly isn't education, as you are not explaining anything. It can't be bragging, as the circuits are generally poorly designed or just ripped off other people.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Amplifiers
- Tubes / Valves
- HYBRID TUBE CFP