Question about 4x12 cabinet wiring - diyAudio
Go Back   Home > Forums > Amplifiers > Tubes / Valves

Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 21st October 2012, 06:15 AM   #1
Phalanx is offline Phalanx  United States
diyAudio Member
 
Join Date: Jul 2012
Default Question about 4x12 cabinet wiring

This might be in the wrong place to post this thread *if so Mod please notify me and remove/replace where it is appropriate*

I have a 4x12 guitar speaker cabinet that I want to wire up with a custom wiring configuration... This is meant to be a recording only cabinet that will remain in my studio... I essentially want to have 4 different 16 ohm speakers... 1 V30, 1 CL80, a 12-75, and an H30, I know how to wire 4 speakers in series/parallel but in addition to that "all-4 speaker" ts/trs input jack, I want to have 4 more independent inputs that I can run 1 single speaker at a time (so one 1/4 inch ts jack for top left, one 1/4 inch ts for top right, 1/4 inch ts bottom left, and 1/4 inch ts bottom right)

again in addition to this, I want to have 2 more inputs that will run 2 of the speakers per input, in either top left bottom right configuration or top right bottom left configuration.

and here is where I get crazy, in addition to ALL OF THAT I want to have an input that runs top 2 and bottom two, and an input that could run Left 2 and right 2 speakers, as well as an output feed to power another 4x12 cabinet...

sounds ridiculous doesn't it ha ha...

I pretty much would like to be able to use any variation of speaker any configuration possible, whether running 4 heads into 1 speaker each, or choosing which 2 speakers to use at the same time with 2 heads or just 1 head running it all.

my understanding of logic is not that great, so when I tried working this out, I got overwhelmed and my brain started to tickle , I dont know of any way to do it without using *marshall cab style* switches, and even that way seems rough, plus I'm trying to cut on costs by using only TS, and/or TRS 1/4 inch connectors, so any input on how to do it with or without would be greatly appreciated.

Thanks guys
  Reply With Quote
Old 22nd October 2012, 12:17 PM   #2
diyAudio Member
 
Join Date: Jul 2008
you need an autotransformer or autoformer. most common use in your senrio is to have banna jacks for the amp out and banana jacks for each speaker. attach a copy of the schematic right on the back of the box and patch accoding to your needs. I don't think your going to be able to rotary switch this. Be advised.....what you get out of this is based on what you put into it.....so...the better the transformer...the better your power handling...bandwith...and tone.
Attached Images
File Type: jpg group2.jpg (29.4 KB, 28 views)
File Type: jpg group3.jpg (31.8 KB, 29 views)
File Type: jpg group1.jpg (39.0 KB, 29 views)

Last edited by speakerfritz; 22nd October 2012 at 12:23 PM.
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
wiring 4x12 speaker cabinet... FTSRYTHM Construction Tips 3 8th November 2011 09:59 PM
help with options in wiring 4x12 8 ohm cabinet 8 and 16 ohms jsagg Multi-Way 13 24th March 2011 04:21 PM
Stereo/Mono 4x12" Marshall cabinet wiring tone1963 Instruments and Amps 5 5th January 2008 09:17 AM
4x12 Speaker cab wiring question mytool4u Instruments and Amps 28 8th August 2007 10:15 PM
diy 4x12 cabinet thejukeboxhero Multi-Way 2 12th December 2004 08:33 PM


New To Site? Need Help?

All times are GMT. The time now is 02:54 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2