• WARNING: Tube/Valve amplifiers use potentially LETHAL HIGH VOLTAGES.
    Building, troubleshooting and testing of these amplifiers should only be
    performed by someone who is thoroughly familiar with
    the safety precautions around high voltages.

Whaddayathink? - tube amp kit

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
How it sounds will depend on the transformers and circuit topology much more than the valve.
With some feedback and good quality transformers it will sound quite reasonable, but possibly a little coloured (some like this colouration).
At this budget end, there is a big jump in performance when you go to push-pull.
 
The transformers have a 20Hz to 45KHz bandwidth.
No feedback, but they have this "full kathode feedback" to take care of speaker imperfections.
I'm a little confused!
What type of coloring is that you mention? 2nd type harmonics?
I really want something that would give a good listenning pleasure at bedroom levels.
So, you think that 250€ is a bit for a SE design?

Thank you once more.
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.