Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum

Can I build a screen reg. with IXYS 10M45?
Can I build a screen reg. with IXYS 10M45?
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 18th September 2012, 08:43 PM   #11
DualTriode is offline DualTriode  United States
diyAudio Member
Join Date: Aug 2009
Location: Sacramento

This has me scratching both head and back side at the same time.

Triode strapped both the anode current and screen current sum and act in parallel. As you say they remain proportionate to each other over the range of values. If the valve is connected as a pentode with a constant voltage on the screen and changing anode voltage, from the load point of view, I do not see anode and screen currents summing or remaining protonate to each other over the range of values.

We often place a CCS at the plate of a triode for parameter restriction including a more constant Mu and reduced distortion. When we do this to a pentode screen we disconnect the summation and proportionate performance of a triode strapped pentode.

If we plot Mu vs Anode Current what do we get;

Triode curves, likely not?

Pentode curves, more likely to look like this?

Tetrode curves, with a funny bump?

Some new kind of Ultra-Linear curves with an odd new flavor series of harmonics?

  Reply With Quote


Can I build a screen reg. with IXYS 10M45?Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
IXYS 10M45 CCS IC question zobsky Tubes / Valves 19 26th July 2008 09:15 PM
Help with e180f and ixys current reg duderduderini Tubes / Valves 4 20th February 2008 01:51 AM
Red Light District Amp Screen Reg mach1 Tubes / Valves 20 28th February 2007 10:37 PM
IXYS 10M45 chip CCS Alastair E Tubes / Valves 3 31st December 2006 01:45 PM
Wanted IXYS 10M45 guglielmope Swap Meet 0 29th June 2006 09:10 AM

New To Site? Need Help?

All times are GMT. The time now is 02:11 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio