• WARNING: Tube/Valve amplifiers use potentially LETHAL HIGH VOLTAGES.
    Building, troubleshooting and testing of these amplifiers should only be
    performed by someone who is thoroughly familiar with
    the safety precautions around high voltages.

Just received 2x PT Choke OT. best implementation ?

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
I just received to mono blocks. Currently not well layed out, That's my opinion!! I have, to work with, 325-0-325 HT and I would like valve rectifiers tho Its not a big thing. The PT has massive and varied heater taps, 12.6@7.2 amps is one! Planning on regulated HT and LT supplies.
The OT has Ultralinear input taps and by my best reckoning has 4k and 8k into 8ohms out. I am driving Alpair 7's
Not sure of the choke,s. Bit hard to quantify I find. Guess they are not really needed in a regulated Ht, but they look good. And Morgan Jones uses them
I am leaning towards EL34/KT77 as I have them and they are not stupid as far as $ goes.
I need a schematic that will sound good! I have seen the "odd watt " class A push pull, but have doubts about the CCS.
Hoping that someone can throw me a bone, been there before, offer some help.
Hopefully you can see what I have, maybe suggest what to build?
Thanks
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.