Inv. Futterman with gain stages between PI and O/P? - diyAudio
Go Back   Home > Forums > Amplifiers > Tubes / Valves

Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 6th August 2012, 07:52 PM   #1
diyAudio Member
 
Alastair E's Avatar
 
Join Date: Feb 2004
Location: South Wales
Default Inv. Futterman with gain stages between PI and O/P?

As above, --

But, the question is, would one still invert the drive from the PI to the two Common-Cathode gain-stages between the PI and the O/P stage...?

The CC stages of course, Invert anyway, and being a little 'brain-dead' tonight, cant get my head around it......

I plan to experiment with a Screen-Drive Futterman and need much more drive volts than I can easily get from a normal concertina PI....
__________________
Das Beste Oder Nichts
  Reply With Quote
Old 6th August 2012, 10:42 PM   #2
DF96 is offline DF96  England
diyAudio Member
 
Join Date: May 2007
For PP you usually need two versions of the signal: normal and inverted. Put these through inverting stages and you get inverted and normal - just as good for PP.
  Reply With Quote
Old 6th August 2012, 11:08 PM   #3
diyAudio Member
 
Alastair E's Avatar
 
Join Date: Feb 2004
Location: South Wales
Yes--Its a PP amp. The 'Inverted-Futterman' uses the upper PI signal connected to the Lower O/P tube and vice-versa, while the PI ground is returned to the O/P--If you see what I mean!

But--As I have inverting amplifiers between the PI and the O/P stage, --do I still connect the PI in this way or do I connect 'straight' to the drivers and let the drivers do the 'inversion'...?
__________________
Das Beste Oder Nichts
  Reply With Quote
Old 7th August 2012, 12:39 AM   #4
diyAudio Member
 
bear's Avatar
 
Join Date: Apr 2002
Location: New York State USA
better question is why build a Futterman at all?

it's really not a particularly good circuit, you can keep the output stage, but the rest is marginal, imo...

_-_-bear
__________________
_-_-bear
http://www.bearlabs.com -- Btw, I don't actually know anything, FYI -- [...2SJ74 Toshiba bogus asian parts - beware! ]
  Reply With Quote
Old 7th August 2012, 06:10 AM   #5
diyAudio Member
 
Join Date: May 2007
What would you benefit from screen drive in an OTL? They are not lowZ as I understand it, haven´t tried them as CFs though. I can be wrong as I have not seen your circuit. If you want to go tetrodes you could go boosted triode instead, ie a lower Ua and an added Ua on top of the anode to Sg. An EL509 can then run at Ua 70V with an added 100V on top to the Sg. And you bring drive voltage down instead!

Secondly why should the concept with two gainstages inside the feedback loop be a good idea? Let the input stage be outside the loop instead.

If you compare an inverted (concertina) Futterman with a noninverted, the inverted already has 10dB NFB around the OP-stage and concertina.

A LTP does not seem to give the intended results when inverted.

Last edited by revintage; 7th August 2012 at 06:34 AM.
  Reply With Quote
Old 7th August 2012, 08:41 AM   #6
diyAudio Member
 
Join Date: May 2007
Quote:
If you want to go tetrodes you could go boosted triode instead, ie a lower Ua and an added Ua on top of the anode to Sg.
Sorry Alastair,

Should be: added Ug on top...

Something like this:
Attached Images
File Type: png EL509.PNG (158.8 KB, 113 views)
  Reply With Quote
Old 7th August 2012, 06:35 PM   #7
diyAudio Member
 
Alastair E's Avatar
 
Join Date: Feb 2004
Location: South Wales
Quote:
Originally Posted by bear View Post
better question is why build a Futterman at all?

it's really not a particularly good circuit, you can keep the output stage, but the rest is marginal, imo...

_-_-bear

Well--To be honest, I wasn't looking for views and Opinions on the Futterman scheme its merits or drawbacks.....

It was merely a simple question!

Adding a set of stages (basically one in each phase) between the PI and O/P ....

Do I Invert Or Not....?

Simple question!

I dunno! Guess I'll have to build it and find out myself failing any helpful replies!

For reference, PL509, screen-driven as C-F's, Drive up to 350V P-P, 200V Plate and OTL in format.
--Little to be gained in MO dropping the supplies to the O/P stage to only 70V.....

NFB whether global or local isn't the great enemy if done carefully and sparingly.....

It is known, that Screen Driven 'sweep-tubes' are extremely linear in their operation......
__________________
Das Beste Oder Nichts
  Reply With Quote
Old 7th August 2012, 08:26 PM   #8
diyAudio Member
 
Join Date: May 2007
Quote:
The CC stages of course, Invert anyway, and being a little 'brain-dead' tonight, cant get my head around it......
There is no answer to your question as it is no inverted Futterman when adding gainstages between the PI and the O/P.

Thought you liked low Ua as you ran 6C33C with cathode bias at 100V.

Last edited by revintage; 7th August 2012 at 08:36 PM.
  Reply With Quote
Old 8th August 2012, 11:17 AM   #9
ilimzn is offline ilimzn  Croatia
diyAudio Member
 
Join Date: Feb 2005
Location: Zagreb
Basically what revintage said... but I suspect your idea is to make the output tubes behave like followers WRT the phase splitter stage, not WRT their own drive (I guess you are looking at screen drive here). In this case, you would need to preserve the phase relationship between the output and the phase splitter, in order to provide the bootstrap feedback that makes the inverted futterman what it is. In other words, if your additional gain stage inverts, then the inputs to this gain stage, must be inverted in phase WRT phase splitter to preserve correct phase relationship. The bottom of the concertina still has to be referenced to the output, so the outputs of the concertina must be exchanged going to your inverting drivers, driver for the bottom tube must be from the bottom side of the concertina, not the top, to take care of the inversion in the driver.

Regarding lowering the supply to the output tubes - hardly little to be gained as the peak dissipation drops signifficantly. I actually like revintage's approach with an 'enhanced triode mode' strapped pentode - how much higher you can strap G2 depends on how much lower the plate can go relative to G2 before you get excessive current through G2, but there is quite a lot of space to play around with this in sweep tubes, since they were designed for that sort of thing.

I have discussed screen drive for OTLs in the other OTL thread. The problem with it is that it's almost too linear - the crossover region for class AB operation shrinks a lot (in classic OPT amps the plate standing current for optimal results can be as much as 10x lower for screen drive), and so does the alowable error in setting it, read: tubes must be well matched or separate AC and DC balancing must be provided, and this still leaves you with problems in adjustment as the tubes age, and worse - for sweep tubes - heat up. Of course, almost all of this can be circumvented by class A operation, but this would be unlikely in an OTL.

Which brings me to another problem with screen drive linearity - OTLs can exploit non-linearity of the transfer characteristic of the tube to operate in something like a geometric mean class A - this mode of operation does not require that the standing current is half of the maximum as is common in class A PP stages (rather much less instead), yet does not drive either half of the PP into cut-off, hence the standing power dissipation can be much lower than in conventional class A, yet there is no crossover region (one could say the whole operating range of currents and voltages for the amp is the crossover region). This is MUCH more difficult with screen drive precisely due to it's linearity.

Finally, totem-pole outputs (Futterman variations being of this kind) are not the most suited for any kind of drive where you have current driven into any control grid and out the cathode, because this current is passed through the load for top half of the output stage, and as far as the load is concerned, lost for the bottom half. In other words, you get a built-n asymmetry. This may or may not be significant depending on your tube choice.
  Reply With Quote
Old 8th August 2012, 04:43 PM   #10
diyAudio Member
 
Alastair E's Avatar
 
Join Date: Feb 2004
Location: South Wales
Ah--Thanks Ilimzn....

Thats exactly the answers Ive been hoping for!

I think its worth playing round with a bread-board just for fun, and see the differences that are apparent with different bias-levels, and to a more conventional Futterman.

I concur about the asymetry of the O/P stage due to the 'lost' screen-current for the lower tube, Be interesting to see the effect of this in the real-world. A way of limiting the screen drive current may be needed--We see.....

My rough idea was the gain stages were to drive either CF's or MOSFETS to the g2 and use those to set the bias of the O/P pairs....

We see what happens anyway! This was just one of those 'mad-Monday' ideas,--You know the sort!
__________________
Das Beste Oder Nichts
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Submitted for your (dis) approval, OTL, Autobias Inv. Futterman Alastair E Tubes / Valves 21 4th February 2014 01:04 AM
all Gain Stages AMP Stee Solid State 2 14th September 2008 08:07 PM
volume between gain stages blindbrett Tubes / Valves 1 8th July 2008 02:22 PM
Inv Gain Clone with on board PSU anbello Chip Amps 65 7th May 2008 01:32 PM


New To Site? Need Help?

All times are GMT. The time now is 06:28 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright ©1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2