Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum

Hybrid+ From Digilander doesn`t work
Hybrid+ From Digilander doesn`t work
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 1st February 2002, 09:30 AM   #1
ralf is offline ralf  Germany
diyAudio Member
Join Date: Dec 2001
Location: Germany
Angry Hybrid+ From Digilander doesn`t work

Perhaps anyone can help me:
I bought two hybrid+ from generoso cozza.

I build the supply for the heating, and the time delay and the ps for the PowerMosfets myself and they work.

When i switch on the hybrid+, the mosfets and the resistors in front are burning.

I dont know how to adjust, and find out where the problem lies.
The only thing Mr. Generoso tells to me is: "it must work".

I should say, that i have build several mos fet amps without problems.

Can anyone help me ?


  Reply With Quote
Old 1st February 2002, 10:58 AM   #2
timc is offline timc
diyAudio Member
Join Date: Aug 2001
Location: Melbourne/Australia
Hi Ralf,

First I should say that I have not had any experience with this kit! I have read acouple of articles about it though.

I would start by checking the voltages in the valve section and adjusting the bias pot P1. If it is burning resistors when you turn it on, I would remove the mosfets, or at lease the grid stopper resistors.

You may not be particulary interested in this at the moment, but
http://www.tubecad.com has done a review on the circuit and proposed some enhancements. If nothing else it shows the voltages in the valve section more clearly (in particular try http://www.tubecad.com/march2001/page21.html).

  Reply With Quote


Hybrid+ From Digilander doesn`t workHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
My scope doesn't work - need help! Giaime Equipment & Tools 17 23rd September 2011 06:47 AM
LM2574 + FET =-> doesn't work Danko Power Supplies 2 7th July 2005 07:42 PM
my VRDS 7 doesn´t work! kwen10 Digital Source 2 13th January 2005 10:25 PM
adcom gfa 545 II doesn't work Mattyo5 Solid State 1 14th February 2004 12:39 AM

New To Site? Need Help?

All times are GMT. The time now is 08:33 PM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio