Hey spread,
So you where unable to read post #9?
If anyone wonders about "MJK-style parafeeds with Schaded 6L6" this is a parafeed AC-coupled version of this:
http://www.diyaudio.com/forums/tubes-valves/165221-most-linear-triode-strapped-pentode-7.html#post2204502
So you where unable to read post #9?
If anyone wonders about "MJK-style parafeeds with Schaded 6L6" this is a parafeed AC-coupled version of this:
http://www.diyaudio.com/forums/tubes-valves/165221-most-linear-triode-strapped-pentode-7.html#post2204502
Last edited:
Read again. Posts 10&13&19. Might come back when the SEPTOR(its in the linked thread) is rebuilt for MOSFET mu-follower, not AT. If going for mu-follower, forget tubes, they have to low gain/gm to reduce un even harmonics.
As MJKs 6L6 hybrid have a little to much odd H it will probably be helped by a follower. Will come back with a schematic of how I think it should be done. and what the indications are.
As MJKs 6L6 hybrid have a little to much odd H it will probably be helped by a follower. Will come back with a schematic of how I think it should be done. and what the indications are.
Last edited:
Read again. Posts 10&13&19. Might come back when the SEPTOR(its in the linked thread) is rebuilt for MOSFET mu-follower, not AT. If going for mu-follower, forget tubes, they have to low gain/gm to reduce un even harmonics.
As MJKs 6L6 hybrid have a little to much odd H it will probably be helped by a follower. Will come back with a schematic of how I think it should be done. and what the indications are.
Would it be possible to have an simple version of this for dummies please?
Out of the initial 3 circuits posted, which was the best and which was the worst, and what type of circuit should we be preferring?
TIA./
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.