Help needed on Mullard EL34PP - Page 3 - diyAudio
Go Back   Home > Forums > Amplifiers > Tubes / Valves

Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 15th October 2003, 12:58 AM   #21
ed is offline ed  Singapore
diyAudio Member
 
Join Date: Feb 2003
Location: Singapore
The tube socket did cross my mind while I was checking the amp with another friend. But we just test using a multimeter and conclude that its working. Maybe changing the socket may help.

Got some new caps and will desolder and resolder the components overs the week end. Will update on the results.

When you mentioned cathode caps are you referring to the EL34s cathodes??

Brgds,

Quote:
Originally posted by DSummer
Switched the tubes, switched the components, still have the same problem... Would it be the problem with tube sockets?

Check all the DC resistance at different points, like anode-gnd, cathode-gnd, grid-gnd (of course with power off and unplug the AC power cord) If possible, remove all those electrolytic caps and check with leakage. If not the tubes, the distortion problem seems like from the caps, most probably the cathode caps.

may be you can try to input a small signal in (from a signal generator, load with a resistor to output terminals) and check any voltage changes (anode, cathode and grid)

I have an experience with a defect 8 pins ceramic socket long time ago. Even it's new, problem solved after I changed the socket, may be you can try it in your last step. Hope you can solve the problems very soon...
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
6V6 PP-based Baby Huey/Mullard inspired design needed... GordonW Tubes / Valves 13 4th August 2008 08:56 AM
el34PP circuit evaluation!! Klimon Tubes / Valves 2 28th January 2007 10:14 PM
Question about DIY EL34PP amp vangogh-hk Tubes / Valves 30 21st September 2006 03:20 PM
Need help for DIY EL34PP tube amp vangogh-hk Tubes / Valves 5 16th March 2006 10:01 PM
Mains Transformer for EL34PP AlmostGotIt Tubes / Valves 20 22nd September 2005 04:29 PM


New To Site? Need Help?

All times are GMT. The time now is 10:56 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2