Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum

Maton Amp
Maton Amp
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 28th May 2012, 06:56 AM   #1
fyrbyrd is offline fyrbyrd
diyAudio Member
 
Join Date: May 2012
Default Maton Amp

Hi All,
I have a Maton Amp super 6 early 1960's looking for parts.Also Looking for a Maton Amp Mastersound series 4,10 or 15 any help would be grateful! Cheers
  Reply With Quote
Old 28th May 2012, 07:26 AM   #2
gingertube is offline gingertube  Australia
diyAudio Member
 
Join Date: Oct 2004
Location: Adelaide South Oz
Are you familiar with this site:
Classic ANZ Valve Guitar Amplifiers

It says the Super 6 has a single 6GW8 triode pentode plus a 6V4 rectifier. The "6" was obviously intended to infer 6 watts but its more likely to be about 4.5 Watts.

Transformers are certainly either Ferguesson or A&R

What parts are you looking for?

Cheers,
Ian

Last edited by gingertube; 28th May 2012 at 07:28 AM. Reason: Spulling Errors.
  Reply With Quote
Old 28th May 2012, 08:28 AM   #3
fyrbyrd is offline fyrbyrd
diyAudio Member
 
Join Date: May 2012
Im missing all the electronics unfortunately. Chasing console and anything else that is needed. I kno its alot but i might get lucky?
I think on the oz valve web site that they stated it was 4 1/2 watts so you were right on the hammer with that call!
Thanks Jeff
  Reply With Quote

Reply


Maton AmpHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Modify & build out (2) Western Electric 300B / 2A3 Hammond monoblock amps & UTC LS-5 quality sound Tubes / Valves 0 9th May 2009 03:59 PM
Krell KSA 80 bias & dc offset check & adjust procedure Clouseaupte Solid State 3 9th August 2007 09:39 AM
DIY-AMP <ZAS> Low THD & IM high bandwith murphy Solid State 18 30th December 2005 10:28 AM


New To Site? Need Help?

All times are GMT. The time now is 04:55 PM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio
Wiki