diyAudio (
-   Tubes / Valves (
-   -   Maton Amp (

fyrbyrd 28th May 2012 06:56 AM

Maton Amp
Hi All,
I have a Maton Amp super 6 early 1960's looking for parts.Also Looking for a Maton Amp Mastersound series 4,10 or 15 any help would be grateful! Cheers

gingertube 28th May 2012 07:26 AM

Are you familiar with this site:
Classic ANZ Valve Guitar Amplifiers

It says the Super 6 has a single 6GW8 triode pentode plus a 6V4 rectifier. The "6" was obviously intended to infer 6 watts but its more likely to be about 4.5 Watts.

Transformers are certainly either Ferguesson or A&R

What parts are you looking for?


fyrbyrd 28th May 2012 08:28 AM

Im missing all the electronics unfortunately. Chasing console and anything else that is needed. I kno its alot but i might get lucky?
I think on the oz valve web site that they stated it was 4 1/2 watts so you were right on the hammer with that call!
Thanks Jeff

All times are GMT. The time now is 03:27 PM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.
Copyright 1999-2016 diyAudio

Content Relevant URLs by vBSEO 3.3.2